Basic parameters ntawm hydraulic xovxwm
Cov txheej txheem tsis yooj yim yog cov ntaub ntawv yooj yim ntawm cov xovxwm hydraulic, uas tau txiav txim siab raws li kev siv thev naus laus zis thiab hom qauv ntawm hydraulic xovxwm. Nws qhia txog kev ua haujlwm muaj peev xwm thiab cov yam ntxwv ntawm cov xovxwm hydraulic, thiab kuj tseem txiav txim siab qhov loj me thiab tag nrho qhov hnyav ntawm hydraulic xovxwm. Cov txheej txheem yooj yim yog xaiv los ntawm tus neeg siv. Lub hauv paus tseem ceeb rau kev yuav khoom. Yog li dab tsi yog qhov tseem ceeb ntawm cov xovxwm hydraulic? Yuav ua li cas nkag siab thiab xaiv qhov tsis muaj ntawm hydraulic xovxwm? Hnub no, kuv yuav txheeb xyuas qhov tseem ceeb ntawm peb -beam plaub-kem hydraulic xovxwm rau koj.
1. Nominal quab yuam (KN)
The nominal force is generally the main parameter of the hydraulic press, which reflects the working capacity of the hydraulic press. The nominal force is the maximum working pressure that the hydraulic press can nominally issue, and is numerically equal to the product of the maximum liquid pressure and the total area of the working plunger (piston radius) R²πpressure gauge value (system pressure)
Note: 1MPa≈100N
Take 60T calculation as an example: cylinder diameter φ180mm system pressure 25MPa (for high pressure)
90903.1425÷10000 (unit conversion)
2. Lub taub hau siab tshaj plaws (qhib qhov siab)
The maximum clearance distance refers to the distance from the upper surface of the table to the lower surface of the movable beam when the movable beam stops at the upper limit position. The maximum clearance distance reflects the size of the working space of the hydraulic press in the height direction. It should be determined by process factors such as the height of the mold and the corresponding backing plate, the size of the working stroke, and the size of the space required for placing the blank and taking out the workpiece. The maximum clearance has a great influence on the overall height of the hydraulic press, the length of the column, the stability of the hydraulic press body and the height of the installation workshop. The maximum clearance distance of the single-arm hydraulic press is the distance from the lower plane of the indenter to the upper surface of the table.
3. Qhov siab tshaj plaws stroke
The maximum stroke refers to the distance from the lower plane of the column guide sleeve of the movable beam to the upper plane of the column travel limit sleeve when the movable beam is at the upper limit position, that is, the maximum distance that the movable beam can move. The maximum stroke should be determined according to the required maximum working stroke during the workpiece forming process.
4. Rooj loj (ntev dav)
The workbench is generally the place where the mold is placed. The size of the worktable refers to the effective size that can be used on the worktable, and the size of the worktable depends on the plane size of the mold and the arrangement of the process.
5. caj pas qhov tob (ib zaug -kem hydraulic xovxwm)
Refers to the distance from the center of the single-column hydraulic press head to the inner surface of the frame.
6. Rov qab quab yuam
The return force refers to the weight of the movable part, the force required for the return process (such as the draft force, the lifting force of the chopping knife), etc.
7. Kev txav ceev ntawm cov nqaj txav txav tau yooj yim (slider ceev): Nws tuaj yeem muab faib ua kev ua haujlwm stroke ceev, idle stroke (kua filling stroke) ceev thiab rov qab stroke ceev.
The idle travel and return travel can generally be higher to improve productivity, but too fast will cause shock and vibration when stopping or reversing.
Muaj peb hom kev ceev:
⑴Constant speed (eternal speed): rising speed, falling speed (using electro-hydraulic reversing valve)
⑵Differential: ①Fast down, slow back ②Slow down, fast back, idle descending, pressing, and returning (with cartridge valve) ③Up and down equal velocity
(3) Fast (kua filling system): Nws tseem txhob txwm tshaj tawm nrog kev ceev -nce lub tog raj kheej, es tsis txhob cia siab rau nws tus kheej qhov hnyav kom poob;
8. Nominal ejection quab yuam thiab ejection stroke
The function of the ejector cylinder is to eject or stretch, and the power and stroke safety of the ejector are determined by the process requirements;
9. Lub Y27 ib leeg- daim ntawv ua haujlwm stretching hydraulic xovxwm kuj yuav tsum paub txog hydraulic pad quab yuam thiab hydraulic pad stroke tsis.
10. Y28 ob npaug - daim ntawv ua daim ntawv kos duab hydraulic xovxwm kuj yuav tsum paub qhov tsis sib xws ntawm kev kos duab quab yuam, qhov khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob khoob kos duab slider, thiab qhov qhib qhov siab ntawm qhov khoob khoob khoob.
11. Txawm hais tias ib qho -kem hydraulic xovxwm yog ib hom chuck lossis ib lub slider sab sauv (nias phaj hom) qauv, seb nws puas tsim nyog los kho lub rooj ua haujlwm, thiab lwm yam.
12. Action sequence (cov txheej txheem ua) Tus neeg siv khoom muab cov txheej txheem nias thiab cov txheej txheem kev cai (txheej txheem txheej txheem).






